What Is The Best 1200 Watt AMP For The Money? Top Picked!

Best 1200 Watt AMP
Best 1200 Watt AMP

If you are looking for one of the best 1200 watt amps, there are many things to have in consideration. First, you have to ask yourself where the amp will be used and before you buy it. Amps come in different categories and also for different products.

You don’t have to worry about anything with us here. You get all the information you need. Let’s have a tour of the amp life and how it works. Also, we will have a look at some of the best 1200 watt amp to have or look into for your car and other devices.

How Does Amp Work?

An amplifier is a term used to describe a circuit that produces an increased version of its input signal. Remember that the amplifiers come in different circuits and are not the same as they are classified. The amplifier works in the principle of converting the DC power from the power supply into AC Voltage.

The principle is basic and gives the best result you need. The amplification is mostly high but what you don’t know is that the conversion efficiency from DC to AC is usually poor. The amplifier does turn a small electric current into a large one, the one you need. When you use an amplifier, it means you already have the current in place, but you need it to be larger or bigger. When getting your amplifier, you have to know where it’s going to be used first.

That is because the amplifier works differently in the different devices but not too much. You may want to get an amp for your car or for your home use. You may connect your amp to your home theatre and increase the sound production in the home. This is true if you are looking for the best sound production in a large event.

• Is 1200W Amp Enough?

Like we had said above, the amps differ from each other depending on where you are going t use one. Well, getting the right amp is not easy. For example, if you have a speaker with 4 ohms, you will need to have an amp that is capable of 4 channels. You then need to check the specification of your amplifier properly before you take any further steps.

Check the RMS power output for the impedance given and compare it to your speaker power output. This will allow you o see whether the speaker and the amp are compatible with each other. If the RMS power output of the amp per channel is the same or exceeds your speaker’s power rating, it could be a viable choice.

The comparison between the two devices is too much; then, they will likely not work well together. From this, we can say that the 1200 watt amp is enough depending on the device you are using. If the speakers range the same power output with the amp of 1200 watts, then it’s perfectly fine to use them together. Get the amp and enjoy more of your sound production to the extent you feel like having.

• Do You Really Need A Car Amp?

The car stereo comes with an inbuilt amplifier. The amplifier from the manufacturers tends to be very weak and may not deliver the quality audio system that you need. This is not the case in all cars but rather in a few. There is some head unit with quality and powerful amplifier built in the system, but they are mostly expensive.

Since cars with better-inbuilt amplifiers are costly, most people prefer pairing their car to an external amplifier to get high-quality sound. This is a good idea and lets you enjoy your music at an affordable price. The question that you have to answer is if you still need a car amp. Then the answer to this question will remain to be it depends on your car’s amp.

If your car amp is low quality, you will need to get an external amplifier to pair. The same goes for when your car amp is good. You don’t need one unless you just want to experience more sound production. The car system requires a dedicated amplifier to harness loud sound waves. Then, we can say that your need an amp if the sound quality of the inbuilt amplifier is not good.

Don’t Take The Advertised Power Ratings For Granted.

One thing most people don’t get or forget is that manufacturers are selling their products. If the manufacturers say it’s 1200W, then it doesn’t have to be the same. For example, some budget amps are advertised as 1200 watts, but they have lower max power output than this.

In some of the cases, they are not able to produce 300 watts of power. For this, it’s recommended you check the fuse to see the recommended fuse rating or check the average and max draw if possible. For this, you will have to do the calculation for the actual power output. That’s is thanks to the ohms law.

You are able to get the actual power output by calculating your average battery voltage by current draw by efficiency voltage. It’s possible to avoid all this math and physics; there are some things you have to do. You may have to do not go for the budget amps and go for more than $100.

The other thing you have to do is to get amps that are CFA2006 certified to get the best. The CEA206 certified amplifiers for cars are the standard that many manufacturers respect. Other great amps are not CEA 2006 compliant and give you the desired result. You have to note that they are a bit costly at $200 and so on.

The Top 12 Best 1200 Watt AMP In 2022.

Three are lots of top best 1200 watt amplifiers out there for you. Here we have reviewed some of the top 12 best 1200 watt amps for you.

BOSS Audio Systems AR1200.2 2 Channel Car Amplifier – 1200 Watts


Boss Audio system is a 2-channel class AB amplifier with a fantastic performance that surpasses most of the amps in the market. However, the amp comes with an overrated output power of 1200 W. When you compare the Boss Audio AR1200.2 to the previous AT900S, and the boss can push more power but not on spar with high-end amps. There are some of the high-end amps that reputable manufacturers make withstand on the of boss audio. The price of the Boss audio AR1200.2 is cheaper than most similar rated amps. You get decent performance with the amp, but you will not be disappointed with the price the amp comes with. When you buy the AR1200.2, you also get a wired subwoofer remote, high input connector, user manual, mounting screws, and so on.

All of these items accompany the amplifier to make it easier for you to use and install. The amp is generally nice from the very moment you set your eyes on it. In fact, you will fall for it and not be disappointed. The mounting points of the amplifier look weak when you look at it as well as fragile. The amp weighs 4.5lb which is not heavy and can be carried easily. The amp features inputs of high level (speaker level) and low-level (RCA). With this, you don’t need an adapter to convert the high-level signal from your receiver. It uses a single 35A fuse which is slightly lacking to push 1200W of power.

The amp comes with a variable bass boost that allows you to have control of exactly how much bass you want to your subwoofers. Also, it’s able to be bridged. You can increase the power output to the speakers and the subwoofers by connecting two amplifier channels.

Pros

  • BOSS Audio Systems AR1200.2 small in size and easy to mount
  • Has a speaker level and the RCA inputs
  • The sound produced is amazing
  • BOSS Audio Systems AR1200.2 fits under your seat perfectly

Cons

  • The mounting points look fragile
  • The advertised power is lower than said

Audiotek AT900S 2 1200W Car Audio Stereo Amplifier

Audio AT900S 2 channel is a class A/B amplifier that is made ideal for your car. The 1200W Audiotek amplifier boosts your speakers with the 2 ohm that is stable. The sound produced by your speaker is way more beautiful than the original car amplifier. It produces a maximum output power of 120 W/power max of 2 ohms. It also produces the 600W x 2/power RMS (4 Ohms) and 200W x 2/ bridged power (4 Ohms) and the 1200W x 1. It has the 103dB with low pass crossover (variable) 35 with a high pass crossover of 160 Hz.

Audiotek AT900S 2 has a 200Hz bass boost variable, just the one you need for a great sound on your speaker. It has amazing inputs; the line level and speaker level also come with the subwoofer remote control. It also a fantastic frequency response of 20HZ and 20 kHz. Its size is something even more impressive. This is especially true if you have been looking for a great small-sized amplifier to carry around with you and easy to install. The amplifier is bridgeable and is able to deliver the 1200W into one 4ohm channel. It supports trio mode operation considering its power output.

Pros

  • It’s slim and small
  • Easy to mount
  • Has variable bass boost
  • Audiotek AT900S 2 Is bridgeable
  • Capable of tri-mode

Cons

  • The 1 ohm/2ohm/3ohm is not stable on bridge mode

Planet Audio AC1200.2 2 Channel Car Amplifier – 1200 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable

The planet audio AC1200.2 is another amazing amplifier like the boss and audiotek. The AC1200.2 amplifier is a two-channel class AB amp with an advertised power output of 1200W maximum. Planet audio AC1200.2 is bale to boost your sound production from the car system to a greater height. It gives you the sound you desire. Though the power they display is 1200W, it’s a shortcoming that the amp has above other things.

The actual power output is not as easy as it is displayed. There are other things at play and do not reach the said power output.
There are lots of other amps made from the same manufacturers that are budget-friendly and offer decent performance. The planet audio amp stands among the best in the same category you will not want to miss. When you buy the amp, you will notice that you get a wired bass level controller and other items. Some of them are mounting screws, a user manual which is a must, and high-level input connectors. These are all items that are important in the process of connecting the amp to the car system and handling. The amplifier is made 12 inches long, 10 inches wide, and 2.4 inches tall.

The size is not big installing it under your car seat is easy also, you can be able to install it inside the trunk. The choice depends greatly on where you find the amp suitable for you. The amp has the speaker level and the RCA inputs that you don’t need to adapt to change from high to low. The amp uses a 35A fuse, and if you do your calculation, you find that the actual power output is 302W.

Pros

  • The size is compact and slim
  • It comes with speaker level and the RCA input
  • It has a bass boost capability
  • Bridgeable

Cons

  • The actual power output is a bit low

Autotek MM1220.2 The Mean Machine 2-Channel Class AB Amp (1,200 Watts)

The Autotek MM1220.2 amplifier is among the best in the market and the best to have with you. The Autotek amplifier works to deliver 1200 watts of power output and bridged at 4 ohms, 300watts x 2 at 4 ohms, 600 watts x2 at 2 ohms. This is an amazing feature that allows you to boost your sound production to a greater height at 0 to 9dB bass. So you get to enjoy more bass with an amplifier in your car system.
The size of the amp makes it possible to mount it easily and also fits your seat. You can choose to have the amp under your seat or get it installed at the trunk. It uses the twin coil isolation design and the pro-Fi high-speed MOSFETS to bring you extreme power with high sound quality. The 2 channel class AB car amplifier comes with features that make it ideal for your car sound system.

The sound produced from the amplifier is clear with minimal distortion. Since the amp is a bridgeable 2 channel class AB amplifier, it provides excellent bass with reduced noise. In addition, the amplifier is able to work from the output RCA connections, which then minimize the need for other cables in the car.

Pros

  • Easy to work with
  • Uses the RCA connectors
  • Sound performance is good
  • Does not use too many or long cables to connect
  • Easy to install

Cons

  • It does not reach the said power output

PIONEER Pio GM-D8704 Class FD 4-Channel Bridgeable Amplifier

An amplifier, since it’s made to be placed under the car seat, should not take much space. It should be sizeable and fit your car space. Pioneer pio GM-D8704 could be what you are looking for in terms of size. It’s made small and able to fill most car spaces to deliver the best of the sound. The amp features a 1-ohm stable circuit, superior high power output, and also installation flexibility. The features that are designed with the amp are all fantastic and make your entertainment and listening experience better.

The Class D amplifier produces a remarkable improvement in power output. The small size of the amplifier makes it versatile in installation and performance. A stable and durable circuit system reduces the risk of high power to achieve a 1-ohm connection. It is made flexible to connect multiple subwoofers to a plan. The GM-D8704 uses the speaker level input that allows you to connect your OEM unit without the use of add-on adapters. With the amp, you will not be disappointed when you get your car. It will help you to save more money and many connections to one system.

The sound produced by the amp in your car is more outstanding than what was there before. This is true because you are looking for an amp to boost your existing car amp. The amplifier power output is bridgeable.

Pros

  • It’s bridgeable
  • Connect with the speaker level connectors
  • Compact design

Cons

  • The amp could be better
  • It’s not stable at 1ohm bridgeable

Alpine PDR-M65 Mono Digital Amplifier

Alpine amp brand is known for its good reputation on the car amplifier market. The power output of the amps is usually honest, as stated by them and even on the entry-level amps. Most of their amps are always not crazy expensive. The Alpine PDR-M65 mono digital amplifier offers excellent quality performance for the price it offers. The Alpine amp is a 1 digital channel amp with advertised 1300 W power output.

With the Alpine amp, you will not be disappointed with your car audio system. When you buy the amplifier, it comes with items such as mounting screws and a user manual. The amplifier comes with one input for the bass level remote, which is sold separately from your package. The wiring equipment is also sold separately.
When you see the amp, you will love it on the first time you see it. The amp is smaller and thinner, which makes it perfect for your car space and ease of installation. In addition, the amplifier features two RCAs that are used for low-level inputs. Though it comes with two RCAs, they are not compatible with the high-level signals, and you will have to buy an adapter to upgrade the low levels to high-level signal.

The adapter helps when you want to connect your factory receiver to the amp. The amp also comes with low pass 50Hz To 400Hz and subsonic 10-40Hz crossovers filter and bass boost 0 to +12dB. This is something you need to get the best sound from your car system.

Pros

  • Compact design
  • Low-level inputs
  • RCA inputs
  • Bass boost
  • Alpine PDR-M65 Is not bridgeable

Cons

  • Alpine PDR-M65 Is not stable at 1 ohm

Kicker CX1200.1 1200W Mono D Audio Amplifier

If you are looking for the best amp for your car, then you have got the right. It may be hard to get what you want but not with all this information here. Kicker CX1200.1 is an excellent amplifier that is made ideal for your use. It helps you get clear, powerful sound in your car. This is also done thanks to its 1200W mono amplifier power. You get the best of 600W x 1 channel at 4 ohms and 1200 watt x I channel at 2 ohms. There are lots of amps out there that are cheap to get, but it cannot compare to the Kicker CX1200.1 AMP. The manufacturers of kicker care about customers and do not overeat their products to sale. The kicker is a digital I-channel amplifier.

When you buy the amp, you get mounting screws and the user manual to help with the installation, but it does not come with remote control. So you get to buy separately. The remote that you need to buy is 43 CXARC with bass enabled. The amp is relatively small, making it easier for your to install, and the car fits your car space perfectly. It features the RCA inputs, and also they are capable of receiving high-level signals.

The amp also features a variable low-pass crossover filter 50Hz TO 200Hz with no subsonic filter. You also are able to boost your bass if you love it with the bass boost centered at 40Hz and boost bass up to 12 dB. Unfortunately, the amp is a mono amp, and it’s not bridgeable; and it features overheat, overload, and short circuit protection like all other amps in the market.

Pros

  • Kicker CX1200.1 made compact and slim
  • Easy to install
  • Kicker CX1200.1 comes with low-level RCA inputs
  • Variable bass boost
  • Its stable at 2 ohms to 4 ohms

Cons

  • It’s a bit expensive
  • Not stable at 1 ohm

Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier

Prime R1200-1D is one of a kind ultra-efficient mono amplifier. The amp is made compact 1.97″ x 6.77″ x 11.06″ to fit your car space and under the seat. It has top-mounted controls and able to deliver 1200 watts RMS of power. It’s made exclusively for use with subwoofers.

PMS power output 400 watts x 1 at 4 ohms or 800 watts x 1 at 2 ohm or 1200 watts x 1 at 1 ohm. It comes with an average current draw of 13.8V music 55A. Its high efficient class D amp produces max power with minimal strain on your vehicle to deliver rich, full bass to your system.

Rockford Fosgate R1200-1D delivers more bass where you want it to and when with the +18dB boost at 45Hz and fine-tune the output from the driver’s seat. It comes with an included remote control when you buy for bass level control. It features the RCA pass-thru outputs with 12 dB Butterworth crossover, infrasonic filter, 4 gauge power, ground connectors, power supply thermal sensing, and MOSFET power supply. It gives all the unique features that support your car amp to deliver exceptional sound while driving or relaxing at home in your car on Saturday while washing. The Rockford Fosgate quality is amazing, with no questions regarding its quality. It covers what you need on the map with no extra penny needed to boost the system beyond that.

Pros

  • Slim design
  • Rockford Fosgate R1200-1D easy to install
  • Rockford Fosgate R1200-1D comes with low-level RCA inputs and the RCA outputs
  • Bass boost of 18dB

Cons

  • Has no high-level inputs

Alpine R-A75M R-Series Monoblock Subwoofer Amplifier – 750 Watts Rms Power with 0 Gauge Amplifier Kit


Alpine is a fantastic brand in the market that delivers honest power output stated from their products. The Alpine R-A75M R-series is one of the best amplifiers in the market produced to make up for the shortcoming of your car sound system. Like we had seen before. You are getting the amp because you are not satisfied with your car’s sound performance. Getting the right amp is your goal here. That’s why the Alpine R-A75M R-Series could be your lifesaver here.
The Alpine amp is made to deliver a power output of 500 watts RMS x 1 at 4 ohms and 750 watts RMS x 1 at 2 ohms. With the amp, you are able to boost your sound bass thanks to the variable bass boost of 12dB at 50Hz. The sound produced afterward is something you will not get without the amplifier. It has a low pass filter of 50 Hz to 400Hz with 24dB /octave for the best performance.

The variable subsonic filter with a minimum 40Hz. With an amp installed in your car, you enjoy the best sound from the car audio system on your ride. This is also great if you love to have a weekend getaway and don’t want to have an external with your all the time.

Pros

  • Easy installation
  • Great sound performance
  • Small size
  • Lightweight
  • It fits your car space
  • It comes with a bass boost
  • Takes care of the overheating problem

Cons

  • It overheats sometimes

Hifonics ZG-1200.2 Zeus Gamma ZG Series 1,200-Watt Max 2-Channel Class A/B Amp

The Hifonics Zeus Gamma ZG series 2 channel class Amp is made to deliver exceptional performance for you. It’s able to provide a maximum of 1200 watts for serious power for your car’s stereo system perfectly. It has been designed with simpatico coil design SPC that features dual coil PWM MOSFET power supply for minimum heat and maximum current levels. This is made to make sure you get the betas of amplifier performance in your car.

Like all other amps, the Hifonics ZG-1200.2 also overheat sometimes and also overload. For this, the amp has been designed with an aluminum heat sink that provides superior heat dissipation. The amp is also a 2 channel amp and has both RCA inputs and high-level input for maximum installation.

When the amp is easy to use and install, you have everything under control. This is something that all manufacturers try to get to make sure their product is user-friendly. The RCA outputs allow you to daisy chain different amplifiers to eliminate the need for additional signal cables. The connection types of the amplifier have been angled in a way to make it easy to access. This, in turn, takes care of wire management to give you clean wiring. Hifonics are among the best brands in the market that meet all your sound needs with exceptional performances. Getting the amp is a choice that one will not regret.

Pros

  • Eliminate the need for adapters
  • Easy to install
  • Great sound performance
  • It comes with RCA inputs and RCA outputs

Cons

  • No Major Issue

Taramp’s MD 1200.1 1 Ohm 1200 Watts Class D Full-Range Mono Amplifier, (Model: MD12001)

Taramps MD 1200.1 1 ohm class D is a great amp to have for your car sound system. The Taramps has made and presented the amplifier in the I ohm version. It’s not something that has been done casually but developed carefully with the highest technology. The technology helps to offer the high performance and quality you need. It gives the best for the varied automotive sound system. It serves the whole frequency range.

That’s why it’s said to be a full range module. It’s classified as mono, meaning it comes with 1 channel with a max power of 1200watt RMS. This is the exact simple amplifier that you need on your car sound system. It helps a lot in getting the best sound produced. For those that have used the amp, its performance is excellent and could help you get the best on your car system. Taramps manufacturers will not disappoint you with the product they produce for you. It has been designed exceptional for both voice production and the bass. This is an essential feature of the amp since the sound produced is all that matters. That said, you will not be surprised when the bass in your songs or other audio is boosted to the next level.

Pros

  • Full range amp
  • Easy to handle
  • Voice and the bass are all good

Cons

  • It’s a 1 channel amp

HIFONICS Zeus 1X1200WATTS@1OHM Mono

HIFONICS Zeus 1X1200W amplifier is one of a kind, the one that makes your sound better and excellent. It comes with angled terminal to allow you to access it at any time with a maximum of 1200 Watts. With the Hifonics, you can complete your car sound system set up and enjoy it.

The Zeus Gamma 1200 W max class D monoblock amplifier works in the simplest way but with amazing sound. Class D amplifier is able to deliver power to your subwoofers, speakers, and other input devices effectively for crisp sound. The sound you get is clear with minimal distortion and heat. However, some features are very important, especially if you want to enjoy the best sound without distortion.

The Hifonics amplifier has been designed to make your listening experience better. In addition, the amplifier has been made for efficient power performance. It rated for 1200 W x 1 channel at 1 ohm, 600 watts x channel at 2 ohms, and 300 watts x channel at 4 ohms. In case you are wondering, the amplifier is a 1 channel monoblock amp. It uses ultra-fi MOSET output device technology and classic aluminum construction for powerful sound.

Apart from a powerful sound-efficient cooling and minimal distortion, the general performance is incredible. The connection of the amp is secure with the car subwoofer amplifier. The amp feature connectors and molded connection terminal that is angled for easy access to all power, ground, and speaker connection.

Pros

  • It easy to use
  • It fits in most of the car space
  • Has minimal distortion

Cons

  • The watts is not as indicated

Power Acoustik RZ4-1200D 1200W Class D 4 Channel Amplifier, Black

Power Acoustik RZ4-1200D is a razor series class D full range amp with 4 channels and a maximum 1200W from the power acoustik. The Power Acoustik packs a large amount of power into the small chassis thanks to the full range class D topology and SMT technology capability. It delivers 1200watt maximum power, a 100watt x at 4 ohms, 150-watt x 4 at 2 ohms, and a 300watt x 2 at 4 ohms bridged. This enables you to get extended power output at will, depending on the channel you are using. In addition, it has impressive features, including a 4-ohm bridge and a 2-ohm stereo class D full range.

It works excellent due to the MOSFET PWM power supply. It has been complemented with preamp adjustment and leaves nothing out to be desired. Getting the amp is the right choice you could make at the moment. You get to experience improved sound produced from the car speakers. Especially when it fits your car space and ratings as well. The chassis is compact in size and allows you to mount it in small spaces in places where the amps may not fit. This is a fantastic feature, especially if your seats on the car are squeezed and do not leave much space in it.

Pros

  • The model is a bit expensive
    Works in all vehicles, including the modern ones

Cons

  • Have no sub plugins, only speakers

8 Things You Should Know Before Buying the Right 1200 watt amp In 2021

Buying the amp is not as easy as it has seemed. There are a lot of things you have to consider before getting one. Here are some of the 8 things you should know before buying the right 1200 watt amplifier in 2021.

  • Type of Amplification

There are different types of amplifiers and can be divided into classes A, class B, AB, and class D. The first three types of the course are the analog amp. The class AB amplifiers are the common type in terms of the 2-channel and the multichannel amplifiers. AB combines the good characteristics of class A and class B amplification. Class D amplification is used for the mono amplifiers. It’s more efficient and has lower temperatures, and also supports great bass production. This is an essential factor that you have to consider if you want to get the best amp for your use.

  • Amp Size

To get your amplifier, the size matters a lot. Though the size of the amp does not seem to be a big deal, it’s crucial. That is also affected by the size of the space available in your car. Measure it correctly, and then decide which of the amp you are going for.

It should fit your car space perfectly for better maintenance, durability, and performance.

  • Amp Wiring Kit

When you buy an amp, the wiring kits are not always in the package, no matter the price. So it’s not hard to choose the right kit. It’s something anybody can do. You can go for the kits with OFC wire and the kits with CCA wire that are the best to have if you are looking for the best sound production.

  • Additional Features

The amps come with more features depending on the type you are getting for your use. Some of the amps come with high and low-level inputs while others only one type the low-level inputs. These features are very significant to the performance of the amplifier. Some amplifiers come with low-level inputs that can receive a high-level signal that doesn’t need you to go for other boosts. It’s good to look carefully at the amp you are getting and the features they come with.

  • The Number of Channels and Impedance Matching

The other factor you have to look into is the number of channels your amp is capable of. The number of channels your amplifier has affects the future plans of your sound system. You could go for the mono amp by adding a subwoofer on the existing speaker if you don’t have plans to extend the system in the future. You can also go for a 2 channel amp if you want to upgrade your stereo speakers. As you progress onward, you could go for 3 or a 4 channel if you’re going to upgrade two front speakers and add a subwoofer to the system.

  • Power Ratings – False Advertising VS Actual Power Ratings

There are lots of cases of on power ratings. Most of the products come with false advertising on the power rating, and you may have to do few calculations to determine the actual power ratings before you buy. An example is that none of the amps under $100 can output 1200 W power. You may have to take the voltage x current draw, which is the fuse rating x efficiency, to get the actual power output. It’s a simple calculation to do that will give you the right power output of your amp before you buy.

  • Budget

Consider your budget very well this is an essential factor. What are you looking for, and how much d you have or can afford. If the amp you are looking for is way too expensive, then start saving for it. Better still, go for something that gives you a decent performance on your car audio system and save lots of buts. Amps that are$200 and above tend to be good with decent performance on your system

  • User Friendly

Not all products that you buy in the market are easy to use and handle. The same goes for the amps. Not all of them are easy to use and install. So you have to consider how easy it is to use and handle. Consider the efficiency of your installing it to your car and the ease of carrying it, and the performance.

FAQ (Frequently Ask Questions)

  • Is those amp worth of money?

Yes. The amps are worth your money if they are compatible with your system and have consistent ratings as well.

  • How many watts is a good amplifier?

To determine how many watts is a good amplifier, you would have to pick an amp that is able to deliver power that is equal to two times the speaker’s power rating.
Generally, you should pick an amplifier that can deliver power equal to twice the speaker’s program/continuous power rating. For example, this means that a speaker with a “nominal impedance” of 8 ohms and a program rating of 350 watts will require an amplifier that can produce 700 watts into an 8-ohm load.

  • What is the most powerful amplifier for car audio?

The most powerful amplifier is a 2600 watt max bridged power x 1 channel at 4 ohm

  • How many amps does a 1200 watt amplifier draw?

With the calculations done, 1200 watt draw 10amp

Conclusions

There are lots of amplifiers available in the market today. Getting the right one may be easy for some people while hard for others. If you are having a problem getting the right, this article is meant for you. With the information that we have provided above, you are able to get the right one or have a direction to take. Some of the amps are good, while others are not.

Sometimes the amplifiers may seem to be too good to be true, but that is not a lie. It’s probably too good. That said, you have your choice in your hand at the moment. You have control over the amp that is suitable for you and where you will use it.

Leave a Comment